• Used in conjunction with Ethernet switch to power PoE cameras
• Meets IEEE 802.3af/at Ethernet standard
• Ethernet speeds up to 10/100/1000MBPS
• 2 year warranty

• Converts HD-TVI, CVI, and AHD Analog cameras to IP
• Up to 5MP@20FPS, 4MP@30fps
• Built-in standard PoE (IEEE 802.3af)
• H.265/H.264/MJPEG compression supported
• Micro SD card slot for edge storage
• DC 12V output for powering cameras
• Two-way audio communication
• Conformant with ONVIF Profile G/S/T
• 5-year warranty
• Supports ROI coding
• 8CH alarm inputs, 4CH alarm outputs
• 1CH audio input, 1 CH audio output

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Extends both power and data 330' per repeater
• Purchase a second repeater for total run of 1000'
• No external power required
• Compatible with the 802.3af standard
• Supports gigabit network speeds
• Built-in LED status indicator
• Plug and play for easy installation

• Power non-PoE IP cameras via a PoE signal by splitting the signal into Ethernet and power
• Can handle up to 20W 802.3at PoE power
• Ethernet speed up to 10/100MBPS
• 2 year warranty

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• Layer-2 managed switch (supporting PoE function)
• 32 x 10/100/1000Mbps adaptive RJ45 ports and 4 x SFP Gigabit optical ports. Two SFP to RJ45 adapters included
• Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
• Ports 1-32 support Power over Ethernet and follows the IEEE802.3af/at standard
• Can automatically detect and identify a power-receiving device and supply power to it through a network cable
• Uses store-and-forward mode, combined with QoS technology, to ensure that the bandwidth is effectively allocated to each port
• Provides stable and reliable power and data transmission for high-power AP, network cameras, PTZ network dome cameras, PoE lighting and other security monitoring equipment

• PoE Watchdog – Resets port automatically when data is not being transmitted. Great for surveillance cameras.
• Link Extension Mode – Provides up to 250 meters long-distance power transmission at 10Mbps
• Port Isolation Mode – Isolates each port except for the uplink ports to provide extra security and network performance
• Storm Control – Enables the switch to monitor traffic levels and to drop broadcast, multicast, and unknown unicast packets when a specified traffic level is exceeded.
• Supports 802.3af/802.3at with a total PoE budget of 378W
• Supports port lightning protection Surge: common mode 2KV, differential mode 1KV; static ESD: air 15KV, contact 8KV
• NDAA Compliant
• 2-Year Warranty

• Can convert up to 8 HD-TVI/Analog cameras to IP @ 30FPS
• Includes Built-on PoE (802.3af/at) Switch with uplink port (1Gbps)
• H.265/H.264/MJPEG compression supported
• Can power up to 8 TVI/Analog cameras with the DC 12V output on each channel
• Micro SD card slots for each channel for edge storage
• 2-way Audio communication ready
• Sensor input and relay output
• Conformant with Onvif Profile G/S/T

• 16 x 10/100M PoE ports + Uplink 2×10/100/1000M Ethernet ports + 1xGigabit SFP port Ethernet Switch
• Detects and supports IEEE802.3af or IEEE802.3at PoE standards.
• Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard
• Compatible with 1U rack installation (rack ears included)